SRV1KIL - APC Easy UPS Online SRV 1000VA 230V

Batteries & Runtime

Run Time : View Runtime Graph
Efficiency : View Efficiency Graph
Front View :

1. UPS Power On/Off button 2. LCD Display
3. Mute/Esc button 4. Mute/Esc button
5. Enter button 6. Up / Down button
7. Alarm LED
1. AC Input 2. Input Circuit Breaker
3. USB Port 4. RS-232
5. Intelligent Card Slot 6. Battery Connector
7. Outlet Group (refer to outlet type and quantity in the left side) 8. Ground Screw
Rear View :

Features
  • ECO Mode: Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • High efficiency: High efficiency rates that remain stable even at lower operating power levels
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
  • Input Power Factor Correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Management Software: Allows you to easily monitor your utility power and manage your UPS.
  • Double conversion on-line topology: Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
  • Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring: Management Software
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Network manageable: Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  • LED indicators: Provide easy-to-read status of the unit and utility power conditions.
  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • SmartSlot: Customize UPS capabilities with management cards.
Provided equipment : Basic UPS signalling RS-232 cable, CD with software, Country-specific detachable power cord, 1 x DC cable, User manual, USB cable
Number of tare power : 28 W
Number of power module free slots : 0
Number of power module filled slots : 0
Redundant : No
UPS size : WS
Cable length : 1.50 M
Colour : Black
Dimension : 23.8 x 40 x 29 Cm (H x D x W)
Net weight : 24 Kg
USB compatible : No
Network frequency : 40 to 70 Hz
Plug standard : IEC 60320 C14
Input voltage limits : 110 to 285 V adjustable (half load), 160 to 280 V
Other Input voltage : 220 V, 240 V
Number of cables : 1
Input voltage : 230 V
Rated power in Watt : 800 W
Maximum configurable power in Watt: : 800 W
Output frequency : 50/60 Hz +/- 3 Hz sync to mains
Other Output voltage : 220 V, 240 V
Crest factor : 03:01:00
UPS type : Double conversion online
Wave type : Sine wave
Number of power socket outlets : 3 IEC 60320 C13
Bypass type : Internal bypass (automatic and manual)
Curve equation : Efficiency
Curve fixed loss : 0.0608
Curve load maximum : 100.00%
Curve load minimum : 7.00%
Curve proportional loss : 0.0545
Curve square loss : 0.0077
Curve X-axis maximum : 100.00%
Curve test cond ID : Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode( s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output
Curve X-axis minimum : 0.00%
Curve X-axis title : Load
Curve X-axis units : Percentage
Curve Y-axis maximum : 100.00%
Curve Y-axis minimum : 50.00%
Curve Y-axis title : Efficiency
Curve Y-axis units : Percentage
Efficiency : 88% (Full Load)
Graph display : 1
Output voltage : 230 V
Maximum configurable power in volt-amperes : 1000 VA
Rated power in volt-amperes : 1000 VA
Runtime at 200W : 00:24:00
Runtime at 400W : 00:11:00
Ambient air temperature for operation : 0 to 40°C
Relative humidity : 0 to 95% non-condensing
Operating altitude : 0 to 3000 m
Ambient air temperature for storage : -20 to 50°C
Storage Relative Humidity Non-condensing : 0 to 95%
Storage altitude : 0 to 15000 M
Acoustic level : 50 dB
Show note OP temperature : No
IP degree of protection : IP20
Battery type : Lead-acid battery
Number of battery filled : slots 0
Number of battery free : slots 0
Battery recharge time : 4 H
Additional information : Configurable for 220 : 230 or 240 nominal output voltage
Liquid value : 0
Battery Curve : D
Battery power in VAH : 516 VAh runtime
Battery option : SRV36BP-9A 1 1032 VAh, SRV36BP-9A 2 1548 VAh, SRV36BP-9A 3 2064 VAh, SRV36BP-9A 4 2580 VAh, SRV36BP-9A
Package 1 Weight : 26.7 Kg
Package 1 Dimension : 35.5 x 47 x 52.5 Cm (H x W x D)
Warranty : 2 years repair or replace