APC Easy UPS On-Line SRV 10000VA 230V with Extended Runtime Battery Pack
Includes: (1) DC cable, Basic UPS signalling RS-232 cable, CD with software, USB cable, User manual Automatic internal bypass Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Intelligent Card Slot Customize UPS capabilities with management cards. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Serial connectivity Provides management of the UPS via a serial port. USB connectivity Provides management of the UPS via a USB port (not available on all models).
Availability
Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
Features
- • Safety-agency approved
- • Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures easy and intuitive monitoring.
- • Management Software Double conversion on-line topology Guarantees a consistently high level of power quality.
- Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process.
- The battery is only used as a backup source.
- • Management Software Allows you to easily monitor your utility power and manage your UPS.
- • Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- • Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- • ECO Mode
- • Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Generator compatible
- • Ensures clean, uninterrupted power to protected equipment when generator power is used.
- • High-efficiency rates that remain stable even at lower operating power levels Input power factor correction
- • Minimizes installation costs by enabling the use of smaller generators and cabling.
Manageability
- • Intelligent Card Slot
- • Customize UPS capabilities with management cards.
- • LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
- • LED Indicators Provide easy-to-read status of the unit and utility power conditions.
- • Network manageable Most models provide remote power management options of the UPS over the network.
- • Many do not have NMC embedded.
- • Serial connectivity Provides management of the UPS via a serial port.
Serviceability
- • Provides early-warning fault analysis ensuring proactive component replacement
- • Disconnected battery notification Warns when a battery is not available to provide backup power.
- • Audible alarms
- • Provides notification of changing utility power and UPS power conditions
- • Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Main Input Voltage : | 230 V |
Other Input Voltage : | 220 V 240 V |
Main Output Voltage : | 230 V |
Other Output Voltage : | 220 V 240 V |
Rated power in W : | 10000 W |
Rated power in VA : | 10000 VA |
Output connector type : | Hard wire 3-wire (1P + N + E) 1 |
Provided equipment : | 1 USB cable 1 RS-232 configuration cable 1 external battery pack 1 battery cable user manual |
Number of power module filled slots : | 0 |
Battery life : | 3…5 year(s) |
Battery charger power : | 1170 W rated |
Battery option : | SRV240BP-9A 1 3024 VAh SRV240BP-9A 2 4536 VAh SRV240BP-9A 3 6048 VAh SRV240BP-9A 4 7560 VAh |
Warranty : | 2 years repair or replace |
![Gallery Image](https://www.promisegulf.com/wp-content/uploads/2024/05/srv10kilsidewebp-53.webp)