APC Smart-UPS 3000VA 230V – SMT3000IC
Batteries & Runtime
Run Time : | View Runtime Graph |
Efficiency : | View Efficiency Graph |
Front View :
1. | Display | 2. | Bezel |
3. | Battery | 4. | Internal battery connector |
5. | Battery compartment door |
Rear View :
1. | SmartConnect Ethernet port | 2. | Serial port | 3. | USB port |
4. | Chassis ground connection screw | 5. | Smart Slot | 6. | Output circuit breaker/overload protection |
7. | Controlled outlet group | 8. | Outlets | 9. | UPS input |
10. | Battery connector | 11. | Input circuit breaker | 12. | EPO connector |
Availability
- Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
- Disconnected battery notification: Warns when a battery is not available to provide backup power.
- Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Serviceability
- User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
- Disconnected battery notification: Warns when a battery is not available to provide backup power.
Adaptability
- Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
- Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
- Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
- Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
- Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation, and zero transfer time to battery during power events.
- Low operating and maintenance costs with proven reliability and intelligent battery management: Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
- Peace of mind that comes with full equipment compatibility and reliability of a leader: Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Output Power Capacity : | 2700 Watts / 3000 VA |
Max Configurable Power (Watts) : | 2700 Watts / 3000 VA |
Nominal Output Voltage : | 230V |
Output Frequency (sync to mains) : | 50/60Hz +/- 3 Hz |
Other Output Voltages : | 220, 240V |
Waveform Type : | Sine wave |
Output Connections : | IEC 320 C19 (Battery Backup) |
Nominal Input Voltage : | 230V |
Input Frequency : | 50/60 Hz +/- 3 Hz (auto sensing) |
Input voltage range for main operations : | 160 - 286 V |
Input voltage adjustable range for mains operation : | 151 - 302V |
Other Input Voltages : | 220 |
Battery Type : | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Typical recharge time : | 3 hour(s) |
Replacement Battery : | RBC55 |
Interface Port(s) : | SmartSlot |
Control panel : | Multi-function LCD status and control console |
Audible Alarm : | Alarm when on battery : distinctive low battery alarm : configurable delays |
Dimension (H x W x D) : | 43.5 x 19.7 x 54.4 cm |
Net Weight : | 52.5 kg |
Operating Environment : | 0 - 40°C |
Operating Relative Humidity : | 0 - 95% |
Operating Elevation : | 0-3000 meters |
Storage Temperature : | -15 TO 45°C |
Storage Relative Humidity : | 0 - 95% |
Storage Elevation : | 0-15000 meters |
Warranty : | 3 years repair or replace (excluding battery) and 2 year for battery |
![Gallery Image](https://www.promisegulf.com/wp-content/uploads/2024/05/qwebp-699.webp)